HOME研究成果 - 基調・招待講演

研究成果

基調・招待講演

【2010】

  1. The 13th Int. Conf. on Intergranular and Interphase Boundaries in Materials (iib 2010) (JIMIC-7)
    "Role of Grain Boundaries in Mechanical Properties of Bulk Nanostructured Metals"
    N.Tsuji 【Invited Lecture】
  2. The 7th Pacific Rim Int. Conf. on Advanced Materials Processing (PRICM 7) Symposium E: Solidification, Deformation and Related Processing
    "Nanostructure Formation during Deep Wire-Drawing of Copper"
    N.Tsuji 【Keynote Lecture】
  3. The 12th International Conference on Aluminum Alloys (ICAA 12)
    "Recrystallization or Not ? :Formation Mechanism of Ultrafine Grains in Aluminum during Severe Plastic Deformation and Subsequent Annealing"
    N.Tsuji 【Keynote Lecture】
  4. International Conference on Advanced Steels 2010 (ICAS 2010)
    "Ways to Manage Both Strength and SDuctility in Nanostructured Steels"
    N.Tsuji 【Keynote Lecture】
  5. International Symposium on Giant Straining Process for Advanced Materials (GSAM 2010)
    "Strength and Electrical Conductivity of Ultrafine Grained Cu Fabricated by Giant Straining Processes"
    N.Tsuji 【Keynote Lecture】
  6. EBSD 2011
    "Usefulness of EBSD Analysis for Nanostructured Metals Fabricated by Severe Plastic Deformation"
    N.Tsuji 【Invited Lecture】
  7. The 13th Int. Conf. on Intergranular and Interphase Boundaries in Materials (iib 2010) (JIMIC-7)
    "Advances in laser assisted atom probe and its applications to the interface characterization of permanent magnets"
    K. Hono and T. Ohkubo 【Invited Lecture】
  8. 52nd International Field Emission Symposium
    "Broadening the applications of the atom probe technique by ultraviolet femtosecond laser"
    K. Hono et al. 【Invited Lecture】
  9. Asia-Pacific Conference on Semiconducting Silicides and Related Materials Science and Technology Towards Sustainable Optoelectronics
    "Advances in laser atom probe and its applications to semiconductor and insulator materials"
    K. Hono and T. Ohkubo 【Invited Lecture】
  10. The 7th Pacific Rim Int. Conf. on Advanced Materials Processing (PRICM 7)
    "Atomic Tomography of Insulating Ceramics by Laser Assisted 3D Atom Probe"
    K. Hono et al. 【Invited Lecture】
  11. The 12th International Conference on Aluminum Alloys (ICAA 12)
    "Advances in laser assisted 3D atom probe and its applications to light metals"
    K. Hono 【Keynote Lecture】
  12. 2010 Fall conference of the Korean Institute of Metals and Materials
    "Enhancement of precipitation hardening of magnesium alloys by microalloying"
    K. Hono, C. L. Mendis, K. Oh-ishi, and J. Jayaraj 【Invited Lecture】
  13. 55th Annual Conference on Magnetism and Magnetic Materials
    "Microstructure and coercivity relationships in permanent magnets for energy-efficient devices"
    K. Hono 【Invited Lecture】
  14. The 7th Pacific Rim Int. Conf. on Advanced Materials Processing (PRICM 7) Symposium A: Advanced Steels and Processing
    "Characterization of substructure evolution in ferrous lenticular martensite"
    A.Shibata 【Keynote Lecture】
  15. Int. Symp. on Multi-scale Modeling and Simulation of Materials
    "Modeling of Dynamic Processes in Nanoscale Systems"
    S.Ogata 【Invited Lecture】
  16. IUMRS-ICA2010 IUMRS 11th Int. Conf. in Asia
    "Modeling of Slow Dynamics in Nanoscale Systems"
    S.Ogata 【Invited Lecture】
  17. Seminar of School of Mater. Sci. and Eng.
    "Dynamics Process in Nanoscale Systems"
    S.Ogata 【Invited Lecture】
  18. The 7th Pacific Rim Int. Conf. on Advanced Materials and Processing (PRICM7),
    "First-Principles Studies of Materials Interfaces"
    M. Kohyama, S. Tanaka, Y. Shiihara, T. Tamura, and S. Ishibashi 【Keynote Lecture】
  19. The 12th International Conference on Aluminum Alloys (ICAA12), September 2010
    "First-Principles Study of the Bonding and Mechanical Properties of Metallic Grain Boundaries"
    M. Kohyama, S. Tanaka, R.Z. Wang, Y. Shiihara, S. Saitou, T. Tamura and S. Ishibashi 【Invited Lecture】
  20. The 13th Asian Workshop on First-Principles Electronic Structure Calculations (Asian13)
    "Ab Initio Energy-Density and Stress-Density Schemes: Applications to Metallic Surfaces and Interfaces"
    M. Kohyama, Y. Shiihara and S. Ishibashi 【Invited Lecture】
  21. The 12th International Conference on Aluminium Alloys (ICAA12)
    "Giant Straining Process for Production of Ultrafine Structures and High Performance Aluminium"
    Zenji Horita 【Plenary Lecture】
  22. International Symposium on Giant Straining Process for Advanced Materials (GSAM2010)
    "Severe plastic deformation under high pressure for production of multifunctional properties"
    Zenji Horita 【Keynote Lecture】
  23. SEMINARS "MICRO- AND NANOMATERIALS" NATIONAL RESEARCH NETWORK "HIGH PERFORMANCE BULK NANOSTRUCTURED MATERIALS"OF THE AUSTRIAN SCIENCE FUND
    "Elastic Functions in Nano-Structured TiNi Produced by SPD"
    K. Tsuchiya 【Invited Lecture】
  24. International Symposium on Giant Straining Process for Advanced Materials (GSAM2010)
    "Effect of Grain Refinement by SPD on Elastic Properties of TiNi"
    K. Tsuchiya, Q. Mei, L. Zhang, T. Ohmura 【Invited Lecture】
  25. 2010 MRS-Fall Meeting, Symposium U
    "Viscosity and Thermal Stability of Supercooled Liquids in Hypoeutectic Zr-Cu-Ni-Al Bulk Metallic Glasses"
    T. Yamasaki, T. Mori, M. Yamada, T. Kikuchi, Y. Yokoyama and A. Inoue 【Invited Lecture】
  26. The 13th international conference on intergranular and interphase boundaries in materials (JIMIC-7), iib2010
    "Grain-boundary character dependence of cyclic creep and fracture behaviors of Cu-SiO2 bicrystals"
    H.Miura and Y.Ito 【Invited Lecture】
  27. 4th international conference on recrystallization and grain growth
    "Mechanisms of dynamic recrystallization in coarse columnar-grained Cu-Sn-P alloy"
    H.Miura, M.Watanabe, T.Shirai and A.Ishibashi 【Invited Lecture】
  28. The sixth international conference on physical and numerical simulation of materials processing, ICPNS2010
    "Ultrafine grain evolution during multi directional forging of Mg alloy and the specific mechanical properties"
    H.Miura, X.Yang and T.Sakai 【Plenary Lecture】
  29. International symposium on giant straining process for advanced materials, GSAM2010
    "Multi directional forging of AZ91Mgalloy and the specific mechanical properties"
    H.Miura, X.Yang and T.Sakai 【Keynote Lecture】
  30. 11th International Conference on Semi-Solid Processing of Alloys and Composites
    "Structure Control for the Improvement of Quality of Ferrous and Non-ferrous Alloyed Products by Semi-solid Processing"
    J. Yanagimoto, S. Sugiyama 【Plenary Lecture】
  31. The 13th International Conference on Intergranular and Interphase Boundaries in Materials (iib2010) [JIMIC-7]
    "Role of Dislocations Emitted from Grain Boundaries on Plastic Deformation of Ultrafine-Grained Materials"
    M. Kato 【Invited Lecture】
  32. HANARO International Symposium,
    "In Situ Neutron Scattering for Microstructural Control of Advanced Steels"
    Y.Tomota 【Invited Lecture】
  33. The 6th International Symposium on the Characterization of Metals and Nanostructred Materials by Neutron and X-ray Scattering
    "In Situ Neutron Scattering for Microstructural Control of Advanced Steels"
    Y.Tomota 【Invited Lecture】
  34. 17th International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM 2010)
    "A Hierarchy of Time Scales in Shear Bands Dynamics in Metallic Glasses: Acoustic Emission Analysis"
    A.Vinogradov 【Keynote Lecture】
  35. Int. Symp. on Giant Straining Process for Advanced Materials (GSAM 2010)
    "Multifunctional ultrafine grained CuCr alloys"
    A.Vinogradov 【Invited Lecture】
  36. Plasticity '11: the 16th International Symposium on Plasticity and Its Current Applications, (Plasticity '11)
    "Modeling and Simulation on Irradiated Material Based on Crystal Plasticity Considering Crystal Defect Induced by Irradiation"
    Y. Aoyagi and Y. Kaji 【Keynote Lecture】
  37. 金研シンポジウム「計算材料科学の展望:次世代スパコンによる飛躍を目指して」
    常識を覆す新しい構造材料としてのバルクナノメタル ~実験により得られた興味深い力学挙動と計算に期待するもの
    辻 伸泰 【招待講演】
  38. 日本鉄鋼協会・日本金属学会関西支部 材料開発研究会 平成22年度第1回研究会「社会基盤材料の新展開」
    常識を覆す新しい社会基盤材料としてのバルクナノメタルの可能性
    辻 伸泰 【招待講演】
  39. 日本熱処理技術協会平成22年度「熱処理技術に関する中堅技術者交流講座」
    鉄鋼・金属の結晶粒超微細化とその大きな可能性 
    辻 伸泰 【招待講演】
  40. 京都産学公連携フォーラム2010
    バルクナノメタル:常識を覆す構造用金属材料
    辻 伸泰 【招待講演】
  41. 島根大学たたらシンポジウム
    繰り返し重ね接合圧延によるバルクナノメタルの創製 ~日本刀の折り返し鍛錬と原理を一にする巨大ひずみ加工法~
    辻 伸泰 【招待講演】
  42. 第71回応用物理学会学術講演会 シンポジウム「材料分野における量子ビーム応用の進展」
    TEMトモグラフィーによる金属材料評価
    波多聰、光原昌寿、池田賢一、中島英治、松村晶、宮崎裕也【招待講演】
  43. 日本鉄鋼協会 鉄鋼科学セミナー2010「鉄の強度、塑性と破壊:新しい要求に向けた基礎と新規アプローチ」
    鉄鋼研究におけるSTEMイメージングと3次元トモグラフィーの応用
    波多聰 【招待講演】
  44. 平成22年度日本顕微鏡学会北海道支部学術講演会
    金属材料のTEMトモグラフィー観察における進展
    波多聰 【招待講演】
  45. PF研究会「X線トポグラフィーの現状と展望」
    TEMによる転位の3次元分布観察
    波多聰 【招待講演】
  46. 日本鉄鋼協会・日本金属学会 中国四国支部 第40回材質制御研究会 「バルクナノメタルの力学特性と関連する諸物理現象」
    強ひずみ加工による金属材料の組織変化・力学的高機能化
    戸高義一 【招待講演】
  47. 日本機械学会北陸信越支部, 特別講演会「金属材料の機械的特性と内部組織の関係」
    高マンガンTWIP鋼および高マンガンTRIP鋼の塑性変形挙動と結晶粒微細化
    上路林太郎 【招待講演】
  48. 東北大学金属材料研究所シンポジウム
    構造材料の力学挙動のナノスケールからの理解―実験と計算に融合に向けて―
    尾方成信 【招待講演】
  49. 東北大学金属材料研究所シンポジウム「計算材料科学の展望:次世代スパコンによる飛躍を目指して」
    計算材料科学による材料界面の解明と設計
    香山正憲田中真悟、椎原良典、田村友幸、石橋章司 【招待講演】
  50. 関西大学第15回先端科学技術シンポジウム
    材料のナノスケール力学とその数値解析
    尾方成信 【招待講演】
  51. 第142回超塑性研究会「アルミニウムの最新動向と応用技術」
    巨大ひずみ加工による結晶粒超微細化と超塑性
    堀田善治 【招待講演】
  52. 第20回格子欠陥フォーラムプログラム「格子欠陥による物質の機能性劣化と機能性制御」
    巨大ひずみ加工による高密度格子欠陥の生成と特異現象
    堀田善治 【招待講演】
  53. 軽金属学会第119回秋期大会 「各種加工法・接合法・熱処理法がアルミニウム合金の時効硬化に及ぼす影響」
    アルミニウム合金の巨大ひずみ加工と時効析出
    堀田善治 【基調講演】
  54. 粉体粉末冶金協会新機能材料分科会金属ガラス・ナノ結晶材料委員会講演会
    強加工による金属ガラス系化合物の構造変化
    土谷浩一 【招待講演】
  55. 社)日本金属学会九州支部・(社)日本鉄鋼協会九州支部,第260回材料科学談話会
    金属間化合物のバルク巨大ひずみ加工によるナノ構造化
    土谷浩一 【招待講演】
  56. 日本金属学会, 日本鉄鋼協会両支部合同サマーセッション
    高温型動的再結晶と低温型再結晶
    三浦博己 【招待講演】
  57. 日本鉄鋼協会, 組織制御に関する産学連携推進フォーラム第6回研究会/br> 高温型・低温型動的再結晶による組織とその発達過程
    三浦博己 【招待講演】
  58. 材料学会,機械学会,精密工学会北陸信越支部特別講演会
    組織制御への変形双晶の利用と機械的性質の改善
    三浦博己 【招待講演】
  59. 第39回高性能Mg合金創成加工研究会・第84回軽金属学会九州支部例会
    AZ系Mg合金の降温多軸鍛造による組織と機械的性質の比較
    三浦博己 【招待講演】
  60. 日本金属学会九州支部・日本鉄鋼協会九州支部 九州大学教育研究プログラム・研究拠点形成プロジェクト(P&P)共催 材料科学談話会
    原子スケール計算機実験による超微細粒材の破壊現象における粒界の役割
    下川智嗣 【講師】
  61. 大阪大学大学院基礎工学研究科機能創成セミナー (第55回)
    ナノ多結晶体金属(バルクナノメタル)の力学特性解明に向けて~原子スケール計算機実験で何ができるか?~
    下川智嗣 【講師】
  62. 日本鉄鋼協会・日本金属学会中国四国支部 研究会「バルクナノメタルの力学特性と関連する諸物理現象」
    原子スケール計算機実験によるバルクナノメタルの力学特性における粒界の 役割
    下川智嗣 【講師】
  63. 金属学会セミナー 「バルクナノメタル 構造用金属材料の新たな可能性」
    原子スケール計算機実験によるバルクナノメタルの力学特性解析
    下川智嗣 【講師】
  64. 日本材料学会塑性力学分科会・日本機械学会計算力学部門A-TS01-15研究会「金属材料における粒界の役割 ?実験・理論・計算機シミュレーションから見えてくること?」
    超微細粒金属材料の破壊特性における粒界の役割
    下川智嗣 【講師】