Members

Representative of this innovative area : Nobuhiro Tsuji (Kyoto University)

Planning group members

Group	Name	Research Subjects	Belong/Position	HP
A01	Nobuhiro Tsuji	Structure evolution and mechanical properties in bulk nanostructured metals.	Dept. of Materials Science and Engineering, Kyoto University. Professor	HP
	Kazuhiro Hono	Nano-scale analysis of composition and structure in Bulk Nanostructured Metals	National Institute for Materials Science. Unit Director, Fellow,Magnetic Materials Unit	HP
	Satoshi Hata	Structure analysis by using advanced electron microscope.	Department of Molecular and Materials, Interdisciplinary Graduate School of Engineering Sciences, Kyushu University Associate Professor	HP
	Yoshikazu Todaka	Clarification of the formation mechanism of non-equilibrium phase during severe plastic deformation in Bulk Nanostructured Metals.	Department of Production Systems Engineering, Toyohashi University of Technology. Associate Professor	HP
	Rintaro Ueji	Microstructure control by applying the twin structure in Bulk Nanostructured Metals.	Department of Advanced Materials Science, Kagawa University Associate Professor	HP
	Daisuke Terada	Structural and mechanical analysis in Bulk Nanostructured Metals.	Department of Mechanical Science and Engineering, Chiba Institute of Technology. Associate Professor	HP
	Akinobu Shibata	Mechanism of the formation of the phase transformation microstructure in Bulk Nanostructured Metals	Dept. of Materials Science and Engineering, Kyoto University. Associate Professor	HP
A01	Shigenobu Ogata	Theoretical analysis of mechanical property and behavior	Department of Mechanical Science and Bioengineering, Graduate School of Engineering Science, Osaka University Professor	HP
	Masanori Kohyama	Analysis of basic physical properties of grain boundary and defect.	Research Institute for Ubiquitous Energy Devices, National Institute of Advanced Industrial Science and Technology. Senior Research Scientist	HP
	Hajime Kimizuka	Formulation of multi-scale modeling method	Department of Mechanical Science and Bioengineering, Graduate School of Engineering Science, Osaka University Associate Professor	HP
	Shingo Tanaka	Formulation of sophisticated first principle calculation method	Research Institute for Ubiquitous Energy Devices, National Institute of Advanced Industrial Science and Technology. Research Scientist	HP
A02	Zenji Horita	Fabrication of bulk nanostructuredmetals by severe plastic deformation process	Department of Materials Science and Engineering, Faculty of Engineering, Kyusyu University. Professor	HP
	Koichi Tsuchiya	Fabrication of non-equilibrium Nanostructured Metals	National Institute for Materials Science. Research Center for Strategic Materials?EGroup Leader	HP
	Kei Ameyama	Fabrication of hybrid microstructure by PM process	Mechanical Engineering, Faculty of Science and Engineering, Ritsumeikan University. Professor	HP
	Tohru Yamasaki	Fabrication of nano-metals by electro-deposition process	Graduate School of Engineering, Material Science and Chemistry, University of Hyogo Professor	HP
	Hiromi Miura	Structural control by temperature and strain rate control during deformation	Department of Mechanical Engineering, Toyohashi University of Technology Professor	HP
A02	Jun Yanagimoto	Physical and computer simulation of microstructure change by severe plastic deformation including the large shear deformation.	Department of Mechanical Engineering and Biofunctional Systems, Institute of Industrial Science, The University of Tokyo Professor	HP
	Tadanobu Inoue	Finite element simulation for fabricating the bulk nanostructured metals by control of the deformation strain	Toughness Desigin Group, Research Center for Strategic Materials,Structural Materials Unit, National Institute for Materials Science. Principal Researcher	HP
	Noriyuki Tsuchida	Establishment of basic data about true stress-true strain relation at plastic deformation limit.	Mechanical Metallurgy Group, Department of Materials Science and Chemistry, School of Engineering, University of Hyogo. Associate professor	HP
	Akira Yanagida	Establishment of basic data for the multi-scale simulation of plastic deformation limit.	School of Engineering, Department of Mechanical Engineering, Tokyo Denki University. Associate professor
A03	Masaharu Kato	Mechanical characteristics and deformation mechanism of bulk nanostructured pure metals and alloys.	Department of Materials Science and Engineering, Interdisciplinary Graduate School of Science and Engineering, Tokyo Institute of Technology Professor	HP
	Susumu Onaka	Process of thermally activated dislocation motions	Department of Materials Science and Engineering, Interdisciplinary Graduate School of Science and Engineering, Tokyo Institute of Technology Professor	HP
	Yo Tomota	In-situ neutron diffraction experiments	Graduate School of Science and Engineering, Ibaraki University. Professor	HP
	Vinogradov Alexei (2010)	Fatigue test	Department of Intelligent Materials Engineering Faculty of Engineering, Osaka City University. Associate professor	HP
	Yoshihisa Kaneko (Since 2011)	Fatigue test	Department of Intelligent Materials Engineering Faculty of Engineering, Osaka City University. Associate professor	HP
	Masaki Tanaka	Clarification of fracture phenomena	Department of Materials Science and Engineering, Kyushu University Assistant professor	HP
	Naoya Kamikawa	Experiments of mechanical characteristics and microstructure observations	Institute for Materials Research, Tohoku University Assistant professor	HP
	Toshiyuki Fujii		Department of Metallurgy and Ceramics Science, Interdisciplinary Graduate School of Science and Engineering, Tokyo Institute of Technology Professor	HP
	Yoji Miyajima		Department of Materials Science and Engineering, Interdisciplinary Graduate School of Science and Engineering, Tokyo Institute of Technology Assistant professor	HP
A03	Tomotsugu Shimokawa	Establishment of new theoretical system about transitional phenomenon of defect structure by atomic scale computational experiment	Division of Innovative Technology and Science, Graduate School of Natural Science & Technology, Kanazawa University Associate professor	HP
	Yoshiteru Aoyagi	Establishment of new crystal plasticity theory considering the effect of grain boundary	Department of Nanomechanics, School of Engineering, Tohoku University Associate professor	HP
Senior Scientific Research Specialist (until Jun. 2012)	Yoshihiko Uematsu		Department of Mechanical and Systems Engineering, Faculty of Engineering, Gifu University Professor	HP
Senior Scientific Research Specialist (until Jul. 2014)	Tadahiro Shibutani		Division of Artificial Environment and Information Research, Graduate School of Environment and Information Sciences, Gifu University Associate professor	HP
Senior Scientific Research Specialist (from Aug. 2014)	Tomoko Hirayama		Falculty of Science and Engineering, Graduate School of Science and Engineering, Doshisha University Professor
Senior Scientific Research Specialist (from Aug. 2014)	Kazunori Ono		New Industry Creation Hatchery Center (NICHe), Tohoku University Associate professor

Publicly-offered members (2013.3~)

Group	Name	Research Subjects	Belong/Position	HP
A01	Terukazu Nishizaki	Superconducting properties in bulk nanostructured metals studied by low-temperature nanoprobe microscopy and transport measurements	Institute for Materials Research,Tohoku University Assistant professor	HP
	Minoru Nishida	Grain boundary control and analysis in bulk nanostructured Ti-Ni alloys	Department of Engineering Sciences for Electronics and Materials, Faculty of Engineering Science,Kyushu University Professor	HP
	Masaki Mito	Kyushu Institute of Technology Professor	HP
A02	Hee Young Kim	Fabrication of Bulk Nanostructured Metals through stress induced phase transformation and clarification of physical properties	University of Tsukuba Associate professor	HP
	Yoshifumi Ikoma		Faculty of Engineering, Kyushu University Assistant professor	HP
	Hiroyuki Miyamoto	Synthesis of nanostrucutred nickel with oxide nanoparticles by electrodeposition	Doshishya University Professor	HP
	Ikumu Watanabe	Multiscale analyses of severe plastic forming	National Institute for Materials Science Researcher, Strength Design Group, Research Center for Strategic Materials/Structural Materials Unit	HP
	Tadahiko Furuta	Strengthening of Bulk Nanostructured Metals with elastic anomaly up to ideal strength	Toyota Central R&D Labs., INC Senior Researcher
A03	Hiroyuki Sato		Graduate School, Hirosaki University Professor	HP
	Kazuhisa Sato		Institute for Materials Research, Cooperative Research and Development Center for Advanced Materials, Tohoku University Associate professor	HP
	Chihiro Watanabe		School of Mechanical EngineeringKanazawa University Associate professor	HP
	Yoshihiko Uematsu		Mechanical Engineering Course, Department of Mechanical Engineering, Faculty of Engineering, Gifu Univerisity Professor	HP
	Hidetoshi Somekawa		Toughness Design Group, Structural Materials Unit, Research Center for Strategic Materials, National Institute fro Materials Science Senior Researcher	HP

Publicly-offered members(2011.4~2013.3)

Group	Name	Research Subjects	Belong/Position	HP
A01	Terukazu Nishizaki	Superconducting properties in bulk nanostructured metals studied by low-temperature nanoprobe microscopy and transport measurements	Institute for Materials Research,Tohoku University Assistant professor	HP
	Yukio Takahashi	Structure Analysis of Bulk Nanostructured Metals by Coherent X-ray Diffraction	Department of Precision Science & Technology,Graduate School of Engineering,Osaka University Associate professor	HP
	Hiroaki Nakano	Control of corrosion resistance factor of ultrafine-grained aluminum alloys processed by severe plastic deformation	Graduate SchoolKyushu University Professor	HP
	Minoru Nishida	Grain boundary control and analysis in bulk nanostructured Ti-Ni alloys	Department of Engineering Sciences for Electronics and Materials, Faculty of Engineering Science,Kyushu University Professor	HP
	Masato Ueda	Static/dynamic analysis of lattice defects by extra-precision electrical resistivity measurements	Department of Chemistry and Materials EngineeringKansai University Associate professor	HP
	Hirotaka Kato	Clarification of the unique tribological behavior in Bulk Nanostructured Metals	Fukui National College of Technology Professor	HP
A02	Hee Young Kim	Fabrication of Bulk Nanostructured Metals through stress induced phase transformation and clarification of physical properties	University of Tsukuba Associate professor	HP
	Hiroyuki Miyamoto	Synthesis of nanostrucutred nickel with oxide nanoparticles by electrodeposition	Doshishya University Professor	HP
	Seiichiro ii	Grain boundary character control of bulk nanostructured metals with chemical interaction	Structural Materials UnitNational Institute for Materials Science Senior Researcher, Structural Materials Unit,Research Center for Strategic Materials	HP
	Ikumu Watanabe	Multiscale analyses of severe plastic forming	National Institute for Materials Science Researcher, Strength Design Group, Research Center for Strategic Materials/Structural Materials Unit	HP
	Tadahiko Furuta	Strengthening of Bulk Nanostructured Metals with elastic anomaly up to ideal strength	Toyota Central R&D Labs., INC Senior Researcher
A03	Hiroyuki Sato		Graduate School, Hirosaki University Professor	HP
	Yoji Mine	Simultaneous enhancement of strength, ductility, and fatigue properties in hydrogen environment in bulk nanostructured austenitic stainless steels	Graduate school of science and technology, Kumamoto University Associate professor	HP
	Hidenari Takagi	Creep characterization of the bulk nanostructured metals	Nihon University full-time lecturer	HP